-
Cutter blades with inserts made of
high strength alloy to cut high strength and reinforced vehicle body
parts
-
Long blade life due to less wear and
tear of inserts
-
Better performance
-
Lower maintenance costs (change
inserts, not blades)
Features: The NXTgen Cutter is constructed
of high strength, aircraft grade, aluminum alloy forgings with a wear
resistant anodized finish. The blades on the NXTgen Cutter are
blades with inserts made of high strength alloy to cut high strength and
reinforced vehicle body parts. The NXTgen Cutter has a “D” handle that can be rotated 360 degrees
or removed when working in confined spaces. The NXTgen Cutter has a
variable speed, “deadman” control with load holding capability and
over-pressurization relief.
Rotating and Removable Handle
The NXTgen Cutter comes with an adjustable and removable "D" shaped
handle. This handle can be rotated 360o or completely removed for use in
confined spaces. Being able to rotate the handle allows the cutter to be
easily using in any position. Professional Note: Most experienced
personnel keep the handle slightly loose. They routinely adjust the
handle position throughout a rescue.
|
NXTgen
Cutter
 |
| NFPA Level Rating |
A8/B9/C8/D9/E9 |
| Length (in/cm) |
33/838 |
| Width (in/cm) |
10.4/265 |
| Depth (in/cm) |
9.3/236 |
| Weight (lbs/kg) |
43.9/19.9 |
Operating Pressure
(max. psi/bar) |
10,500/720 |
Cutting Force
(max. lbs/kN) |
236,250/1050 |
| NFPA Compliant |
Yes |
| Part Number |
ART.593.585.7 |
Rotating and
Removable Handle
The NXTgen
Cutter comes with an adjustable and removable "D" shaped
handle. This handle can be rotated 360o or completely removed
for use in confined spaces. Being able to rotate the handle allows the
cutter to be easily using in any position. Professional Note: Most
experienced personnel keep the handle slightly loose. They routinely
adjust the handle position throughout a rescue.
Push Button Control
One of the most beneficial features of the
NXTgen Cutter is the push
button control. The control is a variable speed device allowing the
cutter to be "feathered." This controls the speed of the cutter when
opening and closing. The control is fitted with a guard to protect the
rescuer's hands from obstructions and offers protection to the connecting
hoses of the tool.
Over-Pressurization
Relief Valve
If the couplers have not been properly engaged or there is a blockage
in the return line, preventing the fluid flow back to the unit, a relief
in the control handle automatically releases fluid. This causes a low
pressure fluid leak from the hole between the hoses. The power unit is
switched to the neutral position and the couplings can be connected or the
blockage removed. Ordinary tools that do not have this device can
literally explode.
|
