Rocker Panel Ram Support
There are three base mounts for the rescue ram to catch-in,
allowing a shorter ram to make a wider opening. The rocker panel support
is designed to spread the force over a wide area of floor and "B" Post.
The high-strength channel section with non-slip gripping teeth slips over
the rocker panel and wraps around the base of the "B" Post.
Clamping the rocker panel support with the spreader forces the gripping
teeth on the underneath side of the support into the metal. This creates a
secure foundation and locks the rocker panel support in place. Also the
Ram Support can be inverted with the angled V-head attachment locked into
the step of the support. The base of the ram is then pushed against the
"A" and "B" Post.
